Analysis of the effect of different steam on sterilization in sterilization supply centres

Tianyi Li; Xiaolian Zhu; Ping Cheng

doi:10.11910/j.issn.2791-2043.2022.1.06

Your Location：

Home >

Browse articles >

Analysis of the effect of different steam on sterilization in sterilization supply centres

MONOGRAPHIC STUDY | Updated：2023-02-22

- Analysis of the effect of different steam on sterilization in sterilization supply centres
- Sterile Supply Vol. 1, Issue 1, (2022)
- Affiliations：
  
  1.Sterilization and Supply Center, General Hospital, The First Affiliated Hospital of Soochow University, 215000, Suzhou, Jiangsu, China
- Author bio：
- Funds：
- DOI：10.11910/j.issn.2791-2043.2022.1.06
  CLC：
Scan for full text
Li Tianyi,Zhu Xiaolian,Cheng Ping.Analysis of the effect of different steam on sterilization in sterilization supply centres[J].Sterile Supply,2022,01(01):22-26.
DOI：

Li Tianyi,Zhu Xiaolian,Cheng Ping.Analysis of the effect of different steam on sterilization in sterilization supply centres[J].Sterile Supply,2022,01(01):22-26. DOI： 10.11910/j.issn.2791-2043.2022.1.06.

摘要

Abstract

Objective,2,To analyse the effect of different steam on the quality of sterilization.,Methods,2,The influence of industrial steam and pure steam on sterilization was analysed in terms of non-condensable gases, dryness values and steam condensate, starting from the requirements of the specifications and experimental comparisons.,Results,2,Industrial steam far exceeded the values given in the standard, while pure steam met the requirements of the standard.,Conclusion,2,The sterilization effect of pure steam is better than that of industrial steam. In steam sterilization in sterile supply centres, more attention should be paid to the selection of the sterilization steam source to guarantee the final quality of sterilizatiox and to protect patient safety.

关键词

Keywords

Sterilization supply centreSteamDryness valueNon-condensable gasSteam condensate

references

FENG J J. Working principle and common faults of pulsating pre-vacuum pressure steam sterilizer[J]. Med Equip, 2017, 30(17): 72-73.

CHANG Y J, GAO W, LI X H, et al. The operation method and monitoring results of pressure steam sterilization[J]. China Health Stand Manag, 2015, 6(15): 199-200.

GUO W, SU Y X, LI J, et al. Behavior of air removal from hollow structure in steam sterilization processes[J]. Mil Med Sci, 2021, 45(1): 50-56, 80.

ZHANG J, ZHANG Y L, XUE Y Y, et al. Countermeasures of steam quality reaching standard for pressure steam sterilization[J]. China Med Devices, 2019, 34(7): 45-48, 64.

Health industry standard of the People's Republic of China.WS310.1-2016 Hospital sterile supply centre part 1: management specification [S].2016-12-27.

National Standard of the People's Republic of China. GB8599-2008 Technical requirements for large steam sterilizers [S].2008-12-12.

European Standard. EN285-2006 Sterilization-Steam sterilizers-Large sterilizers [S]. 2006

British Standard. Scottish Health Technical Memorandum 2010 Validation and verification Sterilization [S].2010

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Research on waste heat recovery and utilization technology of disinfection supply center

Related Author

No data

Related Institution

First Hospital, Jilin University

th Hospital of the Chinese People's Liberation Army

Shinva Medical Instrument Co.,Ltd

The First Hospital, Jilin University

The 964th Hospital of the Chinese People's Liberation Army

⁰