Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters

Jin Song; Mao Peng; Guihong Dai

doi:10.11910/j.issn.2791-2043.2022.1.05

Your Location：

Home >

Browse articles >

Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters

专题研究 | Updated：2023-02-22

- Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters
- Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters
- 消毒供应 2022年1卷第1期
- Affiliations：
  
  The First Affiliated Hospital of Nanjing Medical University Jiangsu Provincial People's Hospital, 210029, Nanjing, China
- Author bio：
- Funds：
- DOI：10.11910/j.issn.2791-2043.2022.1.05
  中图分类号：
- 纸质出版：2022-03-25
- Accepted：
Scan QR Code
Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters[J]. 消毒供应, 2022,1(1):18-21.

Song Jin,Peng Mao,Dai Guihong.Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters[J].Sterile Supply,2022,01(01):18-21.
Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters[J]. 消毒供应, 2022,1(1):18-21. DOI： 10.11910/j.issn.2791-2043.2022.1.05.

Song Jin,Peng Mao,Dai Guihong.Analysis of the use of temperature and pressure detectors in the validation of pressure steam sterilization parameters[J].Sterile Supply,2022,01(01):18-21. DOI： 10.11910/j.issn.2791-2043.2022.1.05.

摘要

Abstract

Objective

According to the specification requirements of pressure steam sterilization equipment parameters such as temperature

time and pressure monitoring.

Methods

Using the corresponding pressure steam sterilization equipment according to temperature and pressure detector parameter validation of sterilization process

the key analysis compare the change of temperature

time.

Results

Ten of the pressure steam sterilization equipment 40 monitoring stations

the temperature of 35 monitoring sites and bring the sterilization equipment shown in temperature data

temperature success rate is 87.5%; 33 points at the time of consistent with own sterilization equipment shown in time data

time success rate of 82.5%.

Conclusion

The application of temperature and pressure detector to parameter validation of pressure steam sterilization equipment

can accurately for sterilization equipment operation monitoring

such as temperature

time

solved the use department of parameters in the process of using pressure steam sterilization equipment。

关键词

Keywords

references

National Health Planning Commission . Hospital sterilization and supply centre part 3: cleaning and disinfection and sterilization effect monitoring . Beijing 2016 . 12

Lu Li . Research and validation of temperature and pressure detection and measurement methods for sterilizers . Dissertation . 2013 . 12

浏览量

166

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Construction of a quality-sensitive index system for managing wet packs after steam sterilization based on evidence